BVZWV - 720, WHITE ACRYLIC SEMI-GLOSS LATEX
- MSDS: BVZWV
- Manufacturer: PERVO PAINT CO
- Product Name: 720, WHITE ACRYLIC SEMI-GLOSS LATEX
- National Stock Number: 8010-00N055149
Product Identification
Product ID:720, WHITE ACRYLIC SEMI-GLOSS LATEX
MSDS Date:01/29/1993
FSC:8010
NIIN:00N055149
MSDS Number: BVZWV
Responsible Party
LOS ANGELES, CA 90001
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 213-758-1147
Cage: 86483
Contractor
Telephone: 213-758-1147
Cage: 86483
Ingredients
AMMONIUM HYDROXIDE; (AMMONIA) (SARA III)
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: TRACE
OSHA PEL 50 PPM (MFR)
ACGIH TLV: 25 PPM (MFR)
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPIONIC ACID, 2-METHYL-, MONOESTER W/2,2,4-TRIMETHYL-1,
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: 2-3%
OSHA PEL N/K
ACGIH TLV: N/K
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 2-3%
OSHA PEL N/K
ACGIH TLV: 50 PPM, VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
EXEMPT WATER/EXEMPT SOLV - 250
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED OR REPEATED
CONTACT OF PRODUCT MAY CAUSE IRRITATION. EYE:DIRECT CONTACT OF
PRODUCT CAN CAUSE IRRITATION. INHAL:VAPOR OR MIST CAN CAUSE
HEADACHE, NAUSEA, IRRITATION OF NOSE, THROAT & EYES.
INGEST:POISONOUS IF SWALLOWED.CAN EFFECT OPTIC NERVE & OTHER
EFFECTS. CHRONIC:BASED ON (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:AVAILABLE DATA, PERMANENT ADVERSE
EFFECTS ARE NOT EXPECTED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH AFFECTED AREAS W/WATER WHILE REMOVING CONTAM CLTHG.
GET IMMED MED ATTN. LAUNDER CONTAM CLTHG BEFORE REUSE. EYES:FLUSH
W/GENEROUS AMTS OF WATER FOR AT LST 15 MINS. GET IMMED MED ATTN.
INGEST: DO NOT INDUCE VOMIT. DILUTE W/WATER/MILK & CALL MD IMMED.
NEVER GIVE FLUIDS/INDUCE VOMIT IF VICTIM IS UNCON/HAVING CONVLS.
INHAL:MOVE TO FRESH AIR. AID IN BRTHG, IF NEC & GET IMMED MED ATTN.
Fire Fighting
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM OR CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WILL FLASH BUT COMBUSTION WILL NOT OCCUR.
Accidental Release
Spill Release Procedures:SPILLS SHOULD BE CONTAINED, SOLIDIFIED &
PLACED IN RCRA LICENSED FACILITY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:EMPTY CONTAINERS W/NO RESIDUE AT ALL MAY BE
LANDFILLED AT LICENSED FACILITY OR FOR RECONDITION. RECOMMEND
CRUSHING OR OTHER MEANS TO PREVENT UNAUTHORIZED REUSE. OTHER
CONTAINERS MUST BE DISPOSED OF IN RCRA LICENSED FACILITY.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
WHEN VAPORS ARE GENERATED ABOVE PEL.
Ventilation:LOCAL EXHAUST TO CONTROL TO RECOMMEND PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEETS
ANSI DESIGN CRITERIA . COVERALLS, APRONS, BOOTS - AS (SUPP DATA)
Work Hygienic Practices:SHOWER AFTER HANDLING THIS PRODUCT. CLEAN
CLOTHING SHOULD BE WORN DAILY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. OTHER PROT EQUIP: AS NECESSRAY TO
PREVENT SKIN CONTACT.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Vapor Pres:1.4 @ 20C
Vapor Density:0.62
Spec Gravity:1.2
pH:>9
Evaporation Rate & Reference:0.33 (BUTYL ACETATE=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE VISCOUS LIQUID; SLIGHTLY AMMONIA ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT OR DIRECT STRONG
SUNLIGHT.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . INCINERATE IN RCRA LICENSED FACILITY. DO NOT
DISCHARGE INTO WATERWAYS OR SEWER SYSTEMS W/OUT PROPER
AUTHORIZATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.